Have you noticed how fast your launch trailer brakes have corroded, seized and needed replacing?

The salt water is a killer, every time your wheel hubs get dipped into the sea they fill with salt water. Once you've pulled your trailer out and the hubs drain, the insides are left with the perfect conditions for accelerated corrosion.

The temptation is to ignore the problem for as long as possible and drive around towing a trailer with no brakes. This is dangerous, not to mention illegal, but now you don’t have to.

You can now stop that accelerated corrosion and save money every year on your trailer maintenance costs.

YOU WILL SAVE TIME:

• Your trailer will need fewer brake hub services and inspections
  
• You will not have to spend time trying to free seized brake hubs

YOU WILL SAVE MONEY:

• You will have to buy fewer replacements of corroded brake parts

Plus you will never need to risk towing a trailer with illegal brakes

The Hub Flush kit is a simple DIY modification to your launching trailer, which enables you to wash out your wheel hubs with fresh water quickly and easily when you are washing down the rest of your boat and trailer.

You will simply have to push the hosepipe onto the manifold at the front of your trailer and the fresh water will be blasted into your wheel hubs washing all the salt water from the inside.

This quick procedure will prevent the accelerated corrosion of your brake components that causes them to seize and need replacing so often.